Black Box Switch Blackbox ServTray Manuel d'utilisateur télécharger pdf (Page 13)

724-746-5500 | blackbox.com

Page 13

Chapter 3: Assembly and Installation

7. Slide out the console drawer. Push the KVM module evenly toward the drawer and secure both units using the attached

thumbscrews. See Figure 3-10.

Thumbscrews (permanently

attached to the tray)

Console drawer

KVM module

Figure 3-10. Securing the KVM module to the console drawer.

8. Make sure the Centronics connectors on the KVM module and attached cable are firmly mated. See Figure 3-11.

Centronics

connector

on cable

⁄16" (8 mm)

Figure 3-11. Centronics connectors.

9. Connect the power supply to the barrel connector on the KVM module.

10. For operation, pull out the drawer from the 4-post rack or cabinet and latch it in the extended position. A locking mechanism

locks the drawer when it’s pulled out, pushed in, or folded down. When not in use, push in the drawer, then fold down, lock,

and secure the display.

1 2 ... 8 9 10 11 12 13 14 15 16 17

Pas de commentaire

Black Box Switch Blackbox ServTray Manuel d'utilisateur Page 13