724-746-5500 | blackbox.com
Page 43
Chapter 3: Installation and Configuration
3.7.5 802.1x Authentication
You can enable 802.1x user identification (based on RADIUS user authentication server) by checking the Enable 802.1x
Authentication box when you select Disable or WEP as the encryption type. The following screen will be displayed:
Figure 3-39. 802.1x screen.
Table 3-16. 802.1x options.
Option Description
Select SSID Choose the SSID you want to configure.
Use internal MD5/PEAP Uses a built-in RADIUS Server (refer to the next section) instead of an external RADIUS server.
RADIUS Server If you check this box, the value of the internal RADIUS server fields will be ignored.
Enable 802.1x Enable or disable 802.1x user authentication.
Authentication
RADIUS Server IP Input the RADIUS authentication server’s IP address here.
address
RADIUS Server Port Input the RADIUS authentication server’s port number here. The default value is 1812.
RADIUS Server Password Input the RADIUS authentication server’s password here.
After you finish the settings, click on the Apply button, and the following message will be displayed:
Figure 3-40. Settings saved successfully prompt.
Commentaires sur ces manuels