Black Box Advanced Console Server Guide de l'utilisateur télécharger pdf (Page 215)

BLACK BOX® CS Installation, Administration, and User’s Guide 185

Network

The “New/Modify SNMP Daemon Configuration” dialog box appears.

3. To edit any SNMP configuration, do the following steps.

a. To edit an SNMPv1/SNMPv2 entry, select the entry from the

“SNMPv1/SNMPv2 Configuration” list and click the “Edit” button.

b. To edit an SNMPv3 entry, select an entry from the “SNMPv3

Configuration” list and click the “Edit” button.

The “New/Modify SNMP Daemon Configuration” dialog box appears.

4. For SNMP v1 or v2 configuration, enter or change the following

information:

a. Enter the community name in the “Community” field.

b. Enter the source IP address or range of IP addresses in the “Source”

field.

5. For SNMP v3 configuration, enter or change the following information:

a. Enter the user name in the “User name” field.

b. Enter the password in the “Password” field.

Note: The SNMPv3 password must be less than 31 characters.

6. For any version of SNMP, do the following steps.

a. Enter the unique object identifier for the object in the “OID” field.

b. Choose “Read Only” or “Read/Write” from the “Permission” field.

7. Click OK.

8. Click “apply changes”

Note: In addition to SNMP configuration described in this section, you need to make

sure SNMP service is enabled and configured for one or more serial ports in

order to send SNMP traps. The related tasks are listed in the following table.

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 391 392

Pas de commentaire

Black Box Advanced Console Server Guide de l'utilisateur Page 215