Black Box LWN600VMA Informations techniques télécharger pdf (Page 8)

724-746-5500 | blackbox.com

Page 8

724-746-5500 | blackbox.com

SmartPath EMS VMA Virtual Appliance Quick Start Guide

Please make a choice:

Restart network services for changes to take effect? <yes|no>

yes

Restart network services successfully.

After restarting network services, the new settings will be operational.

2.4. Troubleshooting

If you cannot ping from the computer hosting SmartPath EMS VMA Virtual Appliance to the IP address that you just set for

SmartPath EMS VMA Virtual Appliance, verify the following:

• The IP address settings of the host computer and SmartPath EMS VMA Virtual Appliance are in the same subnet.

• Your LAN card in the host computer has a link light.

• Your wireless LAN card in the host computer is not connected to an SSID, or it is disabled.

• The VMware NIC for SmartPath EMS VMA Virtual Appliance is connected; you can view the status bar from VMware Menu

options, as shown below:

Figure 2.

• If ping still fails, contact info@blackbox.com or your system engineer.

2.5. Accessing the SmartPath EMS VMA Virtual Appliance GUI

1. After the SmartPath EMS VMA Virtual Appliance processes have been started, open a Web browser on your computer, and

browse to the IP address that you configured through the SmartPath EMS VMA Virtual Appliance CLI.

A certificate warning appears. This is normal because SmartPath EMS VMA Virtual Appliance uses a self-signed certificate and

your browser does not have the CA certificate that signed it. Consequently, your browser cannot verify the certificate. Simply

choose the option to continue to the website.

2. When the Login screen appears, enter the default user name and password:

Username: admin

Password: blackbox

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Black Box LWN600VMA Informations techniques Page 8