Black Box ACS1009A Manuel d'utilisateur télécharger pdf (Page 28)

DVI-D CAT X KVM-EXTENDER

Appendix B: Rack Mount Options

DVI-D Cat X KVM- Extender units can be mounted in a 19” rack using the mounting kit:

DVI-D Cat X- Rackmount Kit. Two different versions are available – one each for

Singlehead and for Dualhead devices.

DVI-D Cat X- Rackmount Kit for Singlehead devices consists of:

Drei Blindplatten

M2,5x5 Philips type

countersunk screws (8x)

M2,5x2 spacer (8x)

Base plate

19” Rackmount Kit for Singlehead devices (ACS1009A-RMK)

DVI-D Cat X- Rackmount Kit for Singlehead devices consists of:

Drei Blindplatten

M2,5x5 Philips type

countersunk screws (8x)

M2,5x2 spacer (8x)

Base plate

19” Rackmount Kit for Dualhead devices (ACS2209A-RMK)

To mount a unit:

1. Align the holes on the base plate with the vacant screw holes on the base of the DVI-D

Cat X KVM- Extender unit.

2. Fasten the base of the unit to the plate of the mounting kit using the supplied screws.

Only use the supplied, short screws, to prevent damages on

the PCB’s

3. Close the remaining gaps with blanking plates.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 37 38

Pas de commentaire

Black Box ACS1009A Manuel d'utilisateur Page 28