Black Box ServSwitch ACU2222A-R2 Guide d'installation télécharger pdf (Page 18)

SERVSWITCH™ ULTRA

2.4 The Rear Panel

All cable connections are made at the rear panel of the ServSwitch Ultra, as

illustrated in Figures 2-4 and 2-5 and described below.

Figure 2-4. The rear panel of a 2 to 1 ServSwitch Ultra (KV5002MA-R2).

Figure 2-5. The rear panel of a 16 to 1 ServSwitch (SW725A-R4).

Panel Label Conn. Description

Connect your computers to these ports with “CPU

Adapter Cables.” At the ServSwitch Ultra end these

cables have a DB25 male connector; at the other

ends, they have appropriate connectors to plug into

your CPUs’ video, keyboard, and mouse ports. These

cables take the signals that would normally pass

between the CPUs’ ports and the monitor, keyboard,

and mouse, and carry them between the CPUs’ ports

and the Switch instead.

You could also connect “submaster” Serv type

switches to these ports using “ServSwitch-to-

ServSwitch Expansion Cables.” These cables have

DB25 male connectors at both ends; at the submaster

end, they should be plugged into a MONITOR/

KEYBOARD/MOUSE port. Refer to Sections 2.5 and

3.2.4.

DB25 FCPU N

[N = a number

from 1 to

either 2, 4, 8,

12, or 16,

depending on

which model

you have]

RS-232

POWER

MONITOR/KEYBOARD/MOUSE

CPU 13 CPU 14CPU 15 CPU 16

CPU 9CPU 12CPU 11 CPU 10

CPU 5 CPU 6CPU 7 CPU 8

CPU 2CPU 1CPU 4CPU 3

CPU1 CPU2 MONITOR/KEYBOARD/MOUSE RS-232

POWER

17VAC CT

CPU3 CPU4

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 95 96

Pas de commentaire

Black Box ServSwitch ACU2222A-R2 Guide d'installation Page 18