Black Box NBS006MA Spécifications télécharger pdf (Page 27)

724-746-5500 | blackbox.com

Page 27

NBS008A

Chapter 7: Console Commands

7. Console Commands

The following list of commands are available from the console prompt (telnet, Web, or enhanced RS-232 interface) of the switch.

All commands are case insensitive, although several variable parameters are case-sensitive (read/write community names, telnet

and web password). GET, SET, SYSTEM, RACK, and PORT can all be abbreviated by the first letter of the command, allowing

shorthand entry of switching commands.

GET ALL

Displays all parameters and settings. An example output is shown here.

System Status: B

IP Address: 192.168.1.30

MAC Address: 00 06 57 00 00 01

Subnet Mask: 255.255.255.0

Gateway IP Address: 192.168.1.1

PING Reply: Enabled

SNMP Enable: Enabled

Read Community Name: public

Write Community Name: private

Web Enable: Enabled

Web Password: mctech

Web Timeout: 300

Web Port: 80

Telnet Enable: Enabled

Telnet Password: dataman

Telnet Timeout: 80

Telnet Port: 23

Monitor IP Address: 0.0.0.0

Monitor MAC Address: 00 00 00 00 00 00

Monitor Interval: 10

Monitor Fail Count: 5

Monitor OK Count: 5

Authentication Trap: Disabled

Alert Type: TRAP

R6000 2.9N JUL 2010, switch Rev. A8

ADMIN IP Addresses:

SNMP Managers:

GET VERSION

Displays the software revisions of the Ethernet Module and firmware on the microcontroller.

R6000 2.9N JUL 2010, switch Rev. A8

GET SYSTEM

Displays the system status. This is the same as the status returned by the SNMP variable abSystemGangPort. The GET SYSTEM

command is meaningful only if you exclusively use the SET SYSTEM command to control the state of all of the switch ports in the

system. The GET SYSTEM command queries rack 1 for status and assumes that all other racks in the system are in the same

connection state. It will report “A” if any ports in the first rack are in position A, or it will report “B” if all ports in the first rack are

in position B.

System Status: A

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Black Box NBS006MA Spécifications Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau Black Box NBS006MA