Black Box Switch ACR1000A-T Manuel d'utilisateur télécharger pdf (Page 24)

ServSwitch Agility and Agility Dual

724-746-5500 | blackbox.com

Page 24

3.2.7 Remote Video Display

The ServSwitch Agility units support DVI digital video signals and so use DVI-D video connectors throughout.

• ServSwitchAgilitymodelscansupportasinglehighresolutionDVI-Dvideodisplayatpixelclocksupto165MHz(equatingto

an example display mode of 1920 x 1200 at 60Hz refresh).

• ServSwitchAgilityDualmodelscansimultaneouslysupportuptotwohighresolutionvideodisplaysatpixelclocksupto

165MHz; or can alternatively support one very high resolution video display (at pixel clocks up to 330MHz).

3.2.7.1 To connect a single DVI display to the ServSwitch Agility

1 Connect the lead from the video display to the DVI-D socket on the rear panel of the ServSwitch Agility remote unit. See Figure

3-16.

DVI-D

DVI-D connection from

video display

Figure 3-16. Connect the digital video link cable to the DVI-D socket.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

Pas de commentaire

Black Box Switch ACR1000A-T Manuel d'utilisateur Page 24