Black Box LWN602HAE Spécifications télécharger pdf (Page 11)

Free Technical Support

| 11

SmartPath Wireless: Features in Detail & Specifications

Wireless VPN capabilities

• An IPSec-based VPN solution for remote offices.

• Supports IPsec hardware acceleration.

• Profile-based split tunneling with NAT support.

• Wireless VPNs supported across mesh network.

• RADIUS, DHCP, NTLM, LDAP, and NTP can be

selected to go to a local or remote network.

SLA compliance

• For health of client and APs, system monitors

connection quality and triggers and reports on

actions to improve quality.

• Automatically boosts, allocates airtime for clients

to best reach performance targets.

• Balances loads for clients connecting to APs.

Security

• Wireless privacy and authentication is Wi-Fi

CERTIFIED

™

, meeting WPA

™

and WPA2

™

protocols,

and 802.11i, WEP, 802.1X, and PSK requirements.

• Granular user profile-based management defines

VLANs, QoS, mobility policies, and security policies

for each user entering the network.

• AES-CCMP, TKIP, and RC4 (WEP only) encryption.

• Mesh traffic encrypted with AES.

• Time-of-day and day-of-week access control and

SSID enabling.

• Up to 16 SSIDs per radio for network segmentation.

• Onboard Stateful Inspection firewall policy

enforcement with session state sync with neighbors.

• ALG support for SIP, DNS, TFTP, and FTP.

• Destination-based MAC firewall support.

• Tunneled guest networks.

• Cluster-wide client isolation.

• WPA-TKIP vulnerability protection.

Authentication

• 802.1X authentication for WEP, WPA, and WPA2.

•

Private PSK authentication enables unique preshared

keys (PSK) for each user within a single SSID.

• RADIUS support with PEAP, EAP-TLS, TTLS, LEAP,

and EAP-FAST.

• LDAP authentication to directory servers, including

OpenLDAP

, Novell

eDirectory, and Apple

OpenDirectory

• Authentication to Microsoft

Active Directory

™

with local credentials caching, also supports

Global Catalog and multiple forests.

• Multiple RADIUS server support (per AP, per SSID).

• RADIUS server (local database or RADIUS proxy).

• Standard Interchange Protocol (SIP2) support for

user validation vs. Library Information Systems (LIS).

• MAC-based RADIUS authentication.

• Dynamic Change of Authorization (RFC3576).

• 100 associated clients per LWN602HAE;

50 associated clients per LWN602AE.

Captive Web portal

• Built-in customizable captive Web portal on APs

for guest access.

•

Integrates easily with third-party Web portal

solutions.

• RADIUS and Active Directory authentication support

for the captive portal.

QoS for data, voice, and video at the radio

• Powerful QoS features, the kind typically only found

on high-end routers.

• Supports Stateful VoIP roaming and failover.

• User profile-based queuing, scheduling, and policing.

• QoS can be assigned per VLAN, user profile, service,

and MAC address.

• SIP call protocol decoding and dynamic port

detection.

• Full queuing support with eight queues (strict

and weighted round robin queuing mechanisms).

• Supports rate limiting per VLAN, per user profile,

per user, and per service.

• VoIP call admission control (CAC).

• WMM

(802.11e) marking and policing for wireless,

802.1p, and/or DiffServ.

• Wi-Fi CERTIFIED WMM.

• WMM (U-APSD) power saving for Wi-Fi devices.

• Supports Spectralink

SVP wireless phone protocol.

Wireless IDS and IDP

• Built-in in-network rogue AP detection.

• Supports AirTight

IDS and IDP integration.

• Rogue AP mitigation and rogue client detection,

including ad hoc clients.

• Wireless compliance checking.

• Sophisticated L2/L3 DoS protection with a wide

range of L2/L3 attack signatures.

• Port scan, IP spoofing, and IP address sweep

protection for added security, particularly for

quarantine and guest networks.

• Wide array of security actions, including logging,

blocking, disassociation, and banning, so the

network can automatically respond to threats.

Mesh and availability

• Flexible radio configuration, enables either interface

to be configured as a mesh.

• Ethernet bridging support across mesh connections

for a single device or workgroup.

• Automatic neighbor detection and route

determination in a mesh.

• Uses L2 routing instead of Spanning Tree for greater

performance and less overhead.

• Self-healing enabled by dynamic path selection.

• For high availability, supports full client session

synchronization across APs.

• Stateful failover of any AP, even in the event

of a wired network failure.

• AAA caching of credentials for remote office

survivability.

• Mesh failover in the event of wired network

or switch failure. Automatically changes access

radio to backhaul radio if such failure occurs.

• Wireless virtual access console.

• Track IP or gateway automatically initiates failover

or troubleshooting tools in the event of a failure.

• Station (client) load balancing.

• Supports fast L2/L3 roaming and tunnel load

balancing for L3 roaming.

• Wireless VPN supported across the mesh.

Redundant data support (LWN602HAE only)

• Dual Ethernet support for redundant data.

• Dual Ethernet connections enable link aggregation

for legacy 10/100 or 10/100/1000 switches.

• Intelligently uses available power and adjusts

as needs change.

• Enables you to benefit from 802.11n wireless while

using legacy 10/100 or 10/100/1000 switches.

SmartPath APs:

Radio Frequencies — 802.11a: 5.150 – 5.950 GHz; 802.11b/g: 2.4 – 2.5 GHz;

802.11n: 2.4 – 2.5 GHz and 5.150 GHz – 5.950 GHz

Radio Modulation — OFDM (802.11a/g), DSSS (802.11b), or 802.11n (802.11n)

Rated Speed — 300 Mbps

Operating Temperature — Indoor unit: +32 to +104° F (0 to +40° C);

Hardened unit: -4 to +130° F (-20 to +55° C)

Connectors — Ethernet: (1) RJ-45 (indoor unit) or (2) RJ-45 (hardened unit),

10/100/1000 Mbps, PoE 802.3af and 802.3at compliant;

Hardened unit only: Serial: (1) RJ-45 (RS-232)

Power — Either PoE or direct power; optional PoE Injector (LPJ001A-T) or

100 – 240-VAC, 50 – 60-Hz universal power supply (LWN600PS-EU) available

Size — Indoor unit: 2"H x 6.5"W x 6.5"D (5 x 16.5 x 16.5 cm);

Hardened unit: 1.25"H x 8.5"W x 8"D (3.2 x 21.5 x 20.3 cm)

Weight — Indoor unit: 1.75 lb. (0.8 kg);

Hardened unit: 3 lb. (1.4 kg)

TECH SPECS

SmartPath EMS Appliance:

Operating Temperature — +32 to +104° F (0 to +40° C)

Connectors — Wired LAN and management ports: (2) RJ-45 (10/100/1000 Mbps);

Serial port: (1) DB9 M (RS-232);

USB port: (1) USB Type A F (USB 2.0)

Power —

Input: 100 – 240-VAC, 50 – 60-Hz, autoswitching, ATX, with PFC connector;

Output: 250 watts

Size — 1.75"H (1U) x 16.8"W x 15.8"D (4.4 x 42.7 x 40.1 cm)

Weight — 13.75 lb. (6.2 kg)

SmartPath Outdoor Kit Enclosure Assembly

Protection Ratings — NEMA 4X, 6P (IEC IP56/IP67)

Wind Survivability —

>265 km/h

Operating Temperature — -13 to +140° F (-25 to +60° C)

Connectors — For external antennas: (4) N-Type F

Size — 11.5"H x 14.25"W x 8.25"D (3.8 x 36.2 x 21 cm)

Weight — With hardened AP: 15 lb. (6.8 kg)

SmartPath features in detail:

1 2 ... 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Black Box LWN602HAE Spécifications Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Points d'accès WLAN Black Box LWN602HAE