Black Box LE1502A Guide de l'utilisateur télécharger pdf (Page 42)

BLACK BOX



Media Converters Installation and User Guide (01/02)

3. Connect the Transmit (TX) port (light colored post) on the Black Box Media

Converter to the Receive (RX) port of the remote device. Begin with the color-

coded strand of the cable for this first TX-to-RX connection.

4. Connect the Receive (RX) port (dark colored post) on the product to the

Transmit (TX) port of the remote device. Use the non-color coded fiber strand for

this.

5. The LINK LED corresponding to the fiber port on the front of the product

will illuminate when a proper connection has been established at both ends

(and when power is ON in the unit). If LINK is not lit after cable

connection, the normal cause is improper cable polarity. Swap the fiber

cables on the product connector to remedy this situation.

6. For the Link-Pass-through model, connection is the same except that the LINK

indication will not be present unless LINK is made for the cables on both sides.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 50 51

Pas de commentaire

Black Box LE1502A Guide de l'utilisateur Page 42