Black Box TS255A Spécifications télécharger pdf (Page 54)

Can I “team” NICs in my analyzer?

Chapter 5 FAQ and Troubleshooting

rev. 1

NOTE: REQUIREMENTS

You need at least one IntelPro/1000 card that supports

Advanced Network Services. If the card has two ports, they

can be teamed, otherwise another NIC with an unused port

must be present.

1 Connect the TAP to the analyzer using the appropriate cables.

The TAP is cabled between the devices being monitored normally

(i.e., it provides a pass-through circuit for the link under test).

Instead of connecting to a single dual-receive port (as is the

preferred deployment), connect the send lines to the transmit

(TX) sides of the two ports you intend to aggregate. You can team

ports on separate cards as long as one of them is an IntelPro card.

Figure 13 NIC teaming

2 Configure the IntelPro/1000 Driver Software to Define Teamed

Connections

A Open Network Connections by right clicking My Network

Places on the Windows Start menu and choosing Properties.

B Right-click a Monitor Port from an IntelPro/1000 card (which

one does not matter) and choose Properties. Click the

Teaming tab.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 63 64

Pas de commentaire

Black Box TS255A Spécifications Page 54