Black Box KVM2032A Spécifications télécharger pdf (Page 20)

Page 18

724-746-5500 | blackbox.com

ServSwitch Multiuser

2. Press F2. The Settings window appears. See Figure 5-2.

Figure 5-2. Settings window.

Using the Tab key, navigate downwards in the Settings window. At the bottom

of the window, press the Tab key to go to the top of the window. To change set-

tings, type in the selected area or press the spacebar.

5.3 Changing the Network Parameters

DHCP enable—When a DHCP server is active on the same network that the

ServSwitch Multiuser is connected to, DHCP provides automatic IP assignment.

This is displayed in the OSD.

DHCP disabled (recommended)—You can assign a fixed IP address to the

ServSwitch Multiuser. Consult your network administrator about using the DHCP.

When DHCP is disabled, enter the IP address, subnet mask, and gateway as

given by your network administrator.

Once the IP address is correct, press Esc twice to save changes and restart the

unit. As explained below, you can now log in to the web interface to complete

the configuraton.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Pas de commentaire

Black Box KVM2032A Spécifications Page 20