Black Box ACS111 Guide d'installation télécharger pdf (Page 59)

3-11

Installation and Setup Guide for Cisco Secure ACS Appliance

78-14573-02

Chapter 3 Installing and Configuring the Cisco Secure ACS Appliance

Installing the Cisco Secure ACS Appliance

Figure 3-5 Chassis Attachment to Cable Tray

Connecting Cables

Use unshielded twisted pair (UTP) copper wire Ethernet cable, with standard

RJ-45 compatible plugs, to connect Cisco Secure ACS Appliance to the network.

To connect the cables, follow these steps:

Warning

Do not work on the system or connect or disconnect cables during periods of

lightning activity.

Step 1 Plug the network connection into the Ethernet port for NIC 1. For the location of

the Ethernet port, see Figure 1-3 on page 1-5. The NIC is configured to

automatically detect the speed and duplex mode of the network.

Tip The Ethernet port for NIC 1 is the lower of the two Ethernet ports. Only one

Ethernet port can be used at one time.

Step 2 Loosen the cable clamp thumbnuts to open the cable clamp jaws and then tighten

the thumbnuts to secure the jaws in the open position.

Step 3 Route the Ethernet cable through the cable clamp jaws.

104986

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 147 148

Pas de commentaire

Black Box ACS111 Guide d'installation Page 59