Black Box Multi-Function Line Driver Manuel d'installation télécharger pdf (Page 13)

2. WIRING

2-5

2. Attach the DVI-D, Video composite and Audio cable connectors to their respective

ports.

3. Set the waterproofing gasket to the boot cover then pass the cables through the

boot cover.

4. Fasten the boot cover with four binding screws.

5. Attach the fixing plate to the boot cover.

6. Pass the cables through appropriate holes in the gasket. The largest hole is for

the DVI-D cable.

7. Set the cable adapter to the entrance of the boot cover.

8. Peel off the seal from the slots to be used on the fixing metal.

9. Fasten the fixing metal to the boot cover with two binding screws.

Audio OUT

Video IN 1/2

DVI-D OUT0

Peel off the seal

from the slots to

be used

Fixing metal

Binding screw

(4 pcs.)

Binding screw

(2 pcs.)

Fixing metal

Gasket

Fixing plate

Boot cover

Waterproofing gasket

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Pas de commentaire

Black Box Multi-Function Line Driver Manuel d'installation Page 13