Black Box LWN600CM-1 Guide de l'utilisateur télécharger pdf (Page 69)

724-746-5500 | blackbox.com

Page 69

Chapter 7: Using SmartPath EMS VMA

3. Open a Web browser and enter the IP address of the MGT interface in the address field. For example, if you changed the IP

address to 10.1.1.8, enter this in the address field: https://10.1.1.8.

NOTE: If you ever forget the IP address of the MGT interface and cannot make an HTTPS connection to SmartPath EMS VMA,

make a serial connection to its console port and enter 1 for "Network Settings and Tools" and then 1 again for "View/Set

IP/Netmask/Gateway/DNS Settings.” The serial connection settings are explained in "Changing Network Settings" in

Section 7.1, Installing and Connecting to the SmartPath EMS VMA GUI.

A login prompt appears.

4. Type the default name (admin) and password (blackbox) in the login fields, and then click Log in.

Figure 7-4. Login screen.

5. After logging in to SmartPath EMS VMA Virtual Appliance, the Black Box. End User License Agreement appears. Read it over,

and if you agree with its content, click Agree.

6. An initial "Welcome to SmartPath EMS VMA" dialog box appears as shown below.

Figure 7-5. Welcome screen.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 191 192

Pas de commentaire

Black Box LWN600CM-1 Guide de l'utilisateur Page 69