Black Box Switch ACR1000A-T Manuel d'utilisateur télécharger pdf (Page 27)

Chapter 3: Installation

724-746-5500 | blackbox.com

Page 27

3.2.9 USB Devices

ServSwitch Agility and Agility Dual remote receiver units have four USB ports to which peripherals may be connected. The ports

are interchangeable. To connect more than four peripherals, one or more USB hubs may be used. The total current that may be

drawn from the USB ports is 1.2A, which should be sufficient for a keyboard, mouse (no more than 100mA each) and any two

other devices (500mA maximum each). If more power for USB devices is required, use a powered USB hub.

1 Connect the lead from the device to any of the four USB sockets on the rear panel of the ServSwitch Agility unit. See

Figure 3-21.

LINE I

USER CONSOLE

MIC I

Connection from USB device

3.2.9.1 Supported USB Devices

USB devices are supported using True Emulation technology. This means that the signals of each USB peripheral are emulated to

the computer so that full functionality is available, subject to the following limitations:

•Keyboards,miceandotherHIDdevicesaresupported.

•Storagedevices(i.e.flashdrives,USBharddisks,CD-ROMdrives)aresupported,buttheymayoperatemoreslowlythanwith

a direct connection.

•Isochronousdevices(includingmicrophones,speakers,webcamsandTVreceivers)arenotcurrentlysupported.

•Manyotherdevices(suchasprinters,scanners,serialadaptersandspecialistUSBdevices)willwork,butduetothehugevariety

of devices available, successful operation cannot be guaranteed.

Figure 3-21. Connecting a USB device to the remote receiver unit.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 45 46

Pas de commentaire

Black Box Switch ACR1000A-T Manuel d'utilisateur Page 27